-
**Describe the issue**
With normal QEMU virtualization, the boot order can be specified by dragging the order of the disks in the VM's configuration. With Apple Virtualization, however, this order …
-
Still more bug and work need to-do
+ [x] Add more support for other model (Xx30 Series)
+ [x] Add support YogaSMC
+ [x] Rework ACPI support for Big Sur (battery, brightness, sleep, ...)
+ [x] Upda…
-
Hello, I have an X220 with the following configuration
CPU: I5-2540M
MEM: 8G
DISK :128G SSD
WLAN: INTEL 7260AC Prepare to be replaced by DW 1550
BIOS : 1.46 It’s been upgraded. It’s got an advan…
-
I tried going through the Quick Start steps but I'm stuck on step 5 & 6.
At step 5, two of the usb ports are not being detected. These missing ports are on the internal header of a NUC8i7BEH.
![st…
-
HDMI is working but wifi cant work on big sur
-
Hello.
I just finished my EFI for a t480s (https://github.com/Hasodikis/T480S-Hackintosh) and I would like to ask you some questions.
1. You have thunderbolt disabled in BIOS. Is your second usb …
-
I notice some problems with the trackpad, works fine 90% of the time,
but randomly starts stuttering and lagging for a few seconds.
-
Hi,
Thanks for doing the reverse engineering work for gpu-switch!
I have a MacbookPro11,5 which is booting to Linux 4.6.0-1amd64 by grubx64.efi
I'd like to use the integrated Intel graphics only.
R…
katef updated
6 years ago
-
Hey,
First of all thank you for EFI. I used your EFI to install macOS Sonoma 14.5, and the installation went smoothly. However, I'm encountering a boot loop issue right after installation (before r…
-
看到EFI更新到了2.2,迫不及待的更新了一下系统,过程中遇到些小问题,反馈一些注意事项给想要更新系统版本的朋友。
1、系统内直接“系统偏好设置-软件更新”下载升级包即可;
2、系统重启后,clover界面会多一个install的安装盘符,必须在clover引导界面选择config-Install配置文件引导安装更新,否则无法进入更新安装过程;
3、更新安装完成之后,依旧选择config-I…