-
Using the template `esp-rs/esp-template` to create a project defaults to using `espflash`. However the "Rust on ESP book" says that `cargo-espflash` should be preferred. After installing `cargo-espfla…
-
The following code blocks forever on the `write_all` line, if I write more than 129 bytes.
130 bytes are output to uart, then the core hangs up....
```rust
use esp_idf_svc::hal::uart::{AsyncUa…
t-moe updated
7 months ago
-
Hello, just tested the web installer with release 0.14.2 on Lolin C3 mini
The installer does its thing but the board does not boot wled afterwards.
The serial writes these messages:
E (286) esp…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Look at the performance benchmark in the document.
- ESP32 SDIO outperforms all other chips.
- In SPI mode, ESP32-C3 outperforms all other chips.
- No data for ESP32-C6 SDIO mode.
How to expl…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
**Describe the bug**
`cmake` is a required prerequisite.
**To Reproduce**
Steps to reproduce the behavior: Follow the instructions in https://probe.rs/docs/getting-started/installation/#installin…
-
I can't longer decode crash dumps because I'm getting a `ValueError`, the crash is from an `ESP32-C6` with `esp-idf v5.2`
`esp-coredump --chip esp32s3 info_corefile --print-mem --core-format elf --…
-
Hi,
how to use spg30-rs with https://github.com/esp-rs/esp-idf-template ?
There is no device: /dev/i2c-1
```
cargo generate --git https://github.com/esp-rs/esp-idf-template cargo
cd projectna…
ds2k5 updated
8 months ago
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…