-
Hello,
I'm new to the esp8266, although not entirely unfamiliar with computers in general, but please don't hesitate to dismiss this issue if there is something fundamental I haven't understood.
…
-
Greetings.
I ran examples/AXP192.ino on my TTGO T-Beam v1.1, and the device turned off and could not be programmed. The example sketch puts the device in an unbootable state.
I recovered the dev…
-
Hello.
After configure esp as AP like below code I was not able to back to station mode
(for egg by using htttp_get example).
The only way how I restore this functionality was to burn nodemcu and t…
hetii updated
8 years ago
-
Hi,
I am getting in troubles trying to use an [esp M2](https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8285---ESP-M2) mounted on a led controller [module](https://fr.aliexpress.com/item/Magic-Home…
-
您好,我刷了1.18固件,但是我编写的文件上传不了到板上,上载文件就报错,请问您知道是怎么回事嘛
-
I bought also a esp32-2432S028R, Chip identifies with ESP32-D0WD-V3 (revision v3.1)
To get in running I had to add/change:
platform = https://github.com/tasmota/platform-espressif32/releases/downlo…
-
I've been using OT GW for quite a while now on my ESP32-S3-DevKitC-1 module. Everything seems to work fine with it.
Yesterday I wanted to finish the testing phase and move the code to a recently acqu…
-
### Operating System
ubuntu 20.04
### Version
v3.2
### Python Version
3
### Full Esptool Command Line that Was Run
python3 -m esptool --chip esp32 --port /dev/ttyUSB0 write_flash …
-
https://github.com/Robocraze/ESP-Now/blob/ab51b4938050b462a6c3f189e8d17bdf7bcb1d00/ESPNowMaster.ino#L299
It is very easy to get rid of the error with commenting out this line, but it would be good …
-
Issue: Cant convert device. tuya-covnert terminates
Device: Gosund SP1
New device, never connected to the APP
Device Firmware unknown
tuya-convert, master branch, latest.
Logfiles attached.
…