-
### Issue
Hello everyone,
this is just to let you know that I ran into this issue after updating to v2.10.2:
- I'm running a very simple home setup with Ansible Semaphore using Docker Compose.
-…
-
**Describe the bug**
I cannot connect via SSH tunnel to a postgresql database using SQLPro Version 2024.21 (Build 111093)
I can SSH via terminal, and I can connect to the postgresql using a trial …
-
Hi all, I'm getting back to using one of Arm's Musca boards, B1 specifically, after having used A1 on the last couple of weeks without any issue.
The DAPLink is configured to QSPI Flash v3.4 and I…
-
Hi, I have another issue regarding the IMXRT1176 :smile:
I'm trying to experiment with both the builtin target and the cmsis pack one. The builtin targets allow to debug only one core at a time, s…
-
Hi Gabriel,
[Posting here because your qosmos.com email bounced]
I am very new to VPP but plan to use it on an upcoming project. I have created and run a test plugin using the VPP script (../..…
-
I want to use platformio to develop the LPC4088. It has an onboard CMSIS-DAP debug probe. I was unable to debug with platformio. Not sure what the root cause was, I opened a [thread at platformio](htt…
tux19 updated
3 years ago
-
前些日子拉了联通家宽送了台VS010，几乎一样的硬件参数让我萌生了想移植的想法。遂对ax3000的dts进行修改试图适配vs010。
使用[ipq50xx-mainline-kernel-5.15-openwrt-23.05](https://github.com/hzyitc/openwrt-redmi-ax3000/tree/ipq50xx-mainline-kernel-5.15-open…
-
From the readme:
> I did not test to flash the AT32 with a ST-Link but I think this should be no big problem.
Any ideas how to flash using ST-Link V2 (st-flash or openocd)? In the readme you menti…
-
I recently installed a Cisco Switch with latest firmware
It has the following SSH configuration
```
#sh ip ssh
SSH Enabled - version 2.0
Authentication methods:publickey,keyboard-interactive,pa…
-
The axolotl model is broken and sometimes faces the wrong way. This usually happens while they swims.
![2024-08-21_22 53 02](https://github.com/user-attachments/assets/fa2cee3f-5e0f-4e9a-b465-e3126…