-
As the title says, it would be cool to save update rate & telemetry ratio behind a model ID (same one used for model match). This would allow for automatic switch to 50hz (or whatever) for long range …
-
## Current Behavior
After going into Wifi / BLE joystick mode via Lua, exiting this mode (which reboots the module) reverts the TX to model 0's configuration.
## Steps to Reproduce
1. Create …
-
https://github.com/ExpressLRS/ExpressLRS-Configurator/blob/7efc26b62ab15a5790c2d22464b1b0f7a9ee9d41/src/api/src/graphql/resolvers/Sources.resolver.ts#L19
This will be useful for the upcoming Backpa…
-
## Current Behavior
```
stack:
0x40091fe0: invoke_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp32/panic.c:715
0x4009225d: abort at /home/r…
-
https://github.com/ExpressLRS/ExpressLRS-Configurator/blob/7efc26b62ab15a5790c2d22464b1b0f7a9ee9d41/src/api/src/services/GitHubClient/index.ts#L23
Git tags black list should be moved from `OctopusG…
-
I installed the BF 4.3.0 RC1 using Configurator 1.8.0 RC1 on two of my quads (pink and grey CineRace 20). Both quads use the same ELRS receiver but different FC boards (pink: CRAZYBEEF4FR, grey: GEPRC…
-
## Current Behavior
BetaFPV Nano TX (2.4Ghz) fails to go into WiFi update mode.
## Steps to Reproduce
1. Turn the radio on & switch to model controlled by ELRS external module (with RX powered …
-
## Current Behavior
I change the power in a script on the control equipment. It was 50, I set it to 100. The screen displays 50. I change the power. It was 100, set 250. Screen display 100. I see the…
-
## Current Behavior
I noticed FUEL bar in iNav LUA Script will give me 0%. Unless, I plug lipo on my whoop first then turn on my TX. This will give me correct reading on FUEL bar in iNav LUA page…
-
## Current Behavior
After a FW flash, the settings in LUA are back to defaults. Prior to the flash, I had rate = 250hz, and after it was default 500hz.
## Steps to Reproduce
1. Flash mast…