-
I followed the tutorial page https://pyscenic.readthedocs.io/en/latest/tutorial.html to try to run pySCENIC, but during importing there is already an error.
```
import os
import glob
import pick…
-
The Feather M0 LoRa draws about 0.37mA of current when idling using the sleepydog library. It would be ideal if we could push this down much further to the 0.01 or even 0.001 mA range and we should be…
-
Hello! This crate looks like exactly what I need!
I have this crate working with [radio-sx127x](https://github.com/ryankurte/rust-radio-sx127x), but I'm having trouble with [embedded-sdmmc](https:/…
-
I want to format the onboard flash on the Feather M0 Express and store some files there.
The format example gives the following output:
```
Adafruit SPI Flash FatFs Format Example
Flash chip JED…
-
Hi,
I'm trying to run the pyscenic CLI, I have already managed to run the grn step and I got an output "adjacencies.tsv", but when I proceed to the ctx step I have a KeyError.
My command is the foll…
-
**Describe the bug**
After one case was been flashed into the board:” ARC(R) HS Development Kit”, there is no case’s information in serial log, and only display the commit ID info.
For example , af…
-
The title pretty well says it all. There is no pin D6 on a Feather M4 Express. There _is_ a pin D7 though. You might want to check the pins for the Feather M0 boards also.
-
I'm trying to port tinyusb to the seeeduino xiao which uses the SAMD21G18A. Since this is the same chip as the feather_m0_express I used it as a template to begin. I've made the following changes:
…
-
I've finished porting [my project](https://github.com/MWatch/mwatch/tree/rtfm-v4-hal) to v4, overall very easy to switch to the new attribute system.
During init I use the systick delay quite a lot…
-
**Describe the bug**
I've been working with Tiny USB on a Feather M0 Express, Feather M4 Express, and Feather nRF52840 Express and could not get serial monitor output to work. Specifically on the nRF…