-
### What happened
Raspberry Pi installation of Mainsail using kiauh. Debian update seems to have broken MMAL dependencies. Uninstalled and reinstalled as Crowsnest not starting.
Several attempts …
-
!! Unable to parse move 'G1 **F1015.2.4** X116.392 Y122.899 E94.82338 ; AutoTowersGenerator changing speed from 42.3mm/s (2538.0mm/m) to 16.9mm/s (1015.2mm/m)'
Speed tower 20-100 stalls immediately…
-
Hello,
I really struggling to Connect my MKS Pi with an skr Pico over UART.
Tested with a Pi3A so it is Not caused by the Pico Motherboard.
Can someone please Provide the solution
-
**Description**
Commit https://github.com/jordanruthe/KlipperScreen/commit/9fa047eb8beb3f503821b560e3364e3935f52bd2 triggers installation of 191 new packages on Pi OS Legacy (Buster). One or more …
-
### Mainsail Version:
v2.3.1
### Browser:
Chrome
### Device:
Desktop PC
### Operating System:
Windows
### What happened?
When using a 1080p webcam stream, the video is lagging alot on mainsai…
-
### What happened
I tried to install on a raspberry pi 4B debian version 12.1
Did a fresh install of kiauh followed by installing fluidd klipper and moonraker.
Then I tried crownest but it failed…
-
Fluidd
Klipper
Moonraker
OS Package
Were updated on the 13th of May 2022, since the update I am unable to select a print regardless of the method : _click printer icon_ or _right click -> print…
-
Hi guys.
I have a voron 24 for over 3 Years now. All fine unless the Bed Level is broken.
Ive tried everything.
The Bed tilts visually down towards Y 350, but Bed-Mesh shows oposite.
My first Lay…
-
### Fluidd Version
v1.21.1
### Browser
Chrome
### Device
Laptop
### Operating System
Linux
### What happened
https://github.com/fluidd-core/fluidd/pull/881 commit was supposed to add the Prob…
-
I've tried via SD card and it never changes firmware.bin to cue. I have flashed this board once but I am getting some errors and attempting to flash again. Getting the following errors:
```
usb-Kl…