-
I'm using the heater controller to set and control my floor heating system. For this system it doesn't make much sense to work with a heating schedule and I would like to disable it.
Is there any way…
-
Иногда температура нагрева устанавливается в 255 градусов (FF?) из-за чего бойлер перегревается и срабатывает термореле.
После физического сброса термореле, температура воды в бойлере 91 градус.
Ест…
-
Regarding controlling the heater to achieve consistent (non-wandering) temperatures.
Using PWM (pulse width modulation) is a practical and known method for controlling analog devices to vary outpu…
-
A crude filtering algorithm was implemented in the ucomp code to prevent the lyot filter from reacting to noise in the temperature readings, slow the reaction to temperature change, and better match t…
-
HI, I a newbie in HA so could you excuse me if my question is silly.
I installed and configure your blueprint to optimise my PV panels on my water heater consommation but it doesn't work.
in the log…
-
In case you were curious I've just recently made a similar module for the new SHT31 sensor, and tested it on raspberry pi 2 model b.
I'm posting here in part to give credit here; since I used your SH…
-
When running at 1 minute timesteps, the thermostat control with deadband can exceed the deadband limits. It's mainly an issue for the water heater, which can increase in temperature pretty quickly. It…
-
When I set the thermostat to heat/cool and target temperature is reached it doesn't turn off the AC (even though the smart thermostat status shows off). If the AC is turned off manually, it won't star…
-
I only want to set FlowTempDesired, nothing else, but i cant do anything, only read some sensors. I tried as a HomeAssistant addon, and as a standalone docker container too.
root@017394b08039:/# eb…
-
Have you considered adding the ability to turn off the fan as well after the heaters are shut off? My fans are always blazing away and seemed like a logical choice to build it into this plugin.