-
Will you be adding RPI5 Support?
thanks
-
On my Surface Go 3, pressing the power button in any distro outside of Ubuntu 21.10 with latest Surface Kernel causes either a complete shutdown with no warning or a kernel panic (which I have trouble…
-
### Describe the bug
**Device:** UniElec u7621-06 256m 16m (changed to 64m)
**System:** OpenWrt SNAPSHOT r22256-14334c222e / LuCI Master git-23.039.28596-41e9b8d
**Kernel:** 5.15.98
**Time the pro…
-
I recently bought the new xioami smart speaker with ir controll, which is a google home device, features the same clock as the L05C(?).
I couldn't make out any uart rx/tx pads. The processor is a Aml…
-
Hi,
I'm running the simple switch example and trying to follow the setup instructions. I have a PC connected to one port of the KSZ and a Netgear switch connected to the other port of the KSZ. In …
-
The Hardware section of the ESP32-radio V2.0 Manual states that the ESP32 module is basically an ESP32 on a small print. You used a DOIT ESP32 Development Board.
In the Arduio IDE version 1.8.19, t…
-
ryan@STARFORGED:~/uru-card-fido2-authenticator$ platformio run --target upload
Processing esp32dev (platform: espressif32; board: esp32dev; framework: arduino)
--------------------------------------…
-
The irresistable draw of the MeCrisp family is the large installed base, and the promise that many of those implemented peripherals will also work on Mecrisp-Ice. The problem is that I do not know wh…
-
Curious if this project is still being looked at? I am wondering if I should look into using my XTM-21W.
Not sure if this is useful information but I pulled the Atheros wifi card from it and found…
-
I am looking at tuya-based video doorbells available in my region and this one seems quite common.
https://shopee.com.my/product/361966449/8762138469?smtt=0.208419637-1628041873.9
Is there a poss…