-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
Hello, I am using the unmodified (besides ADO = 0) data collection code for calibration. When I run it on my Arduino Zero based board, I can only seem to collect accel data. Why is this?
-
I am using ESP32 with MPU6050_DMP6_ESPWiFi.ino file(The snippet of the mpu_setup() function is here
```c++
void mpu_setup()
{
// join I2C bus (I2Cdev library doesn't do this automatically)
#if …
-
I am trying to read the value of 2 pin (Header X12 pin 5 and 6 the GPIO 18 and 19)
It totally works fine using mraa_gpio_read, but the problem is the high overhead associated.
This code will also …
-
```
Hi everybody,
Having now quite some experience in working with I2C devices I think that the
current implementation of Wire lacks some very helpful routines to do something
which is quite standa…
-
```
Hi everybody,
Having now quite some experience in working with I2C devices I think that the
current implementation of Wire lacks some very helpful routines to do something
which is quite standa…
-
The 4 ports of FT4232H are configured as below and the configuration is saved to EEPROM,
Port A: VCP
Port B: D2XX
Port C: VCP
Port D: VCP
Next, port B is configured as I2C master using …