-
##### SUMMARY
Recently got an Echo Dot g3. I have HA installed on a Pi, with NodeRed as an Add-On. My Pi is on my main LAN (vlan 1). My Echo Dot is on my IoT vlan (vlan 10). I have confirmed …
-
1. Obtain an MxChip and run the Get Started tutorial at http://aka.ms/mxchip.
1. Confirm from the device UI that messages are being sent (e.g. 4/4).
1. In VS Code, right-click on your device and sel…
-
Ceiling Fan Dimmer Switch DS03 doesn't show up in home assistant
**Home Assistant Version**
- 2021.2.3
**Device info (please complete the following information, which can be found in [log](ht…
-
I believe there might be a problem using Nano 33 ioT in a Mesh environment. Let me explain: I have a Mesh consisting of 1 Master and 4 Mesh devices, all connected to each other by wires and acting as …
-
Tuya 2.
Works properly on Smart app. The problem is similar to other devices from Gosund that I see on this forum. Old Tuya app it updated as a switch and didn't have dimming ability.
chec…
-
This occurs during power interruptions when all servers shut down. Once the power is restored, some users sessions with disabled pause cannot connect to the internet, even though their sessions are st…
-
Hi there.
I recently updated my raspberry pi 2 to Win10 IoT 10.0.10586.63, and I noticed that my FTDI driver based code is no longer working. Specifically, calls to FTManager.GetDeviceList() returns …
-
New safety check in device OS cause SOS+14 panic as pointed out here
https://github.com/particle-iot/device-os/issues/1835
Needs to incorporate the suggestions given by @avtolstoy
-
It will be update following issues
- [x] `rocon_ninja_block` code upgrade using rocon_iot_bridge
- [x] Setting callback url when rocon iot bridge is initialized instead of manually register way
- [x] …
dwlee updated
9 years ago
-
This issue is for brainstorming ideas for conference talks
These ideas should be general and supported by thin-edge.io
I.e. Talk about a general topic like Edge, which issues can be faced, as an exa…