-
Subscribe to this issue and stay notified about new [daily trending repos in C](https://github.com/trending/c?since=daily)!
-
### Problem description
The Plant Monitor can be paired but doesn't show any entities
It shows up as a TS0601 _TZE284_aao3yzhs
Link: https://www.aliexpress.com/item/1005007330089764.html
![…
-
I've tried the image Debian 5.10.160-1-rk356x with XFCE on Rock 3C and is working correctly.
Trying the Debian 5.10.160-1-rk356x only CLI it won't boot, here the log where it get blocked:
U-Boot …
-
Not a software bug in general - but you could call it a documentation bug in general.
I am trying to get the BBB into service, I have never worked with it before, only during the last month or so.
…
-
### Problem description
Unique identifier for Zigbee device - Tuya Zemismart blind cover motor
### Solution description
Integrate MODELS_INFO: **_TZE200_udank5zs**
Into ts601_cover.py
Should…
-
### Problem description
Hi!
Seems, ZHA does not recognise any entities in this tuya switch. See pictures. Unfortunately, I have not found a quirk for this.
### Solution description
Both two…
-
# Log Message
```
2024-06-27 17:16:41.085 WARNING (MainThread) [custom_components.tuya_local.config_flow] Device matches ceres_plus_petfeeder with quality of 100%. DPS: {"updated_at": 171949…
-
### Problem description
This door/window sensor with light sensor is not working. No update at all. `Try a few quirks with no result.`
### Solution description
A kick in the right direction o…
-
I installed the SD CARD made all the rtsp edits and booted up ... seems this still requires access to wyze for authorization before anything else works?
Is this possible to run local only on home s…
-
I'm currently struggling with process of provisioning the Tapo C100 camera.
When camera is in factory state it sets the unprotected AP named `Tapo_Camera_XXXX` where `XXXX` is some hex value. After…