-
### Description of the problem
I see from other reports iperf3 doesn't give the full 5 gbpe throughput - presumably limited by the usb3 port but I am not seeing any improvement over 2.5 gbpe and am…
-
Dear LizardFS community & dev team,
I've set up LFS infra on 2 physical hosts and 4 VMs:
- 2x metadata server
- 2x chunkserver
all on ESXi 6.5 and CentOS 7, hosts connected with 1GbE, VMs with…
-
This is related to my previous issue with running maz-nat config file in userspace. Since we believe the problem is more related to Click itself not maz config file, I am decided to open a new issue f…
-
你是否碰到过以下这些情况,如何排错都无果:
1、服务端hysteria server正常启动,但是client却连不上,timeout?
2、有时能用,有时不能用的玄学?
3、iperf udp能通,但是一用hysteria就无法使用?
对没错,就是这些开IDC的商家为了能让自己的服务正常稳定使用,而通过专业的安全设备精准的限制QUIC/UDP传输,这样做的基本是很小一部分中小型的厂商…
-
Hello! I'm trying to start MT7612e with a custom MIPS board(Baikal architecture). At the moment I have the following situation:
**Attempt 1:**
Using a driver from 5.4.72 mainline I got ENOSYS error …
-
I have a cluster with 3 machines:
* Ubuntu Linux 22.04 with 32GB RAM + Quadro RTX 4000
* Ubuntu Linux 22.04 with 64GB RAM + Quadro RTX 5000
* M2 MacOS 14.7 with 32GB of RAM
_I still couldn…
-
Something strange is happening here.
goal=3, 3 chunkservers with 2 gigabit nic bonded together (balance-rr).
"iperf" show about 2gbit in a single connection (thanks to balance-rr bonding mode)
…
-
## Expected Behavior
I've used Iperf with TCP, and the VM's packet capture shows only TCP packets. Shouldn't it be showing MPTCP?
The command I ran on the laptop was:
iperf -c -p 59990 -b 5M -t …
-
Hi Xianjun,
My name is Nitin, first of all let me congratulate you. Openwifi is really very neat and strong work from you, thanks for doing it and sharing it.
1. Our image is used directly or…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### What happened?
Use KOPS simple GCE k8s cluster (https://kops.sigs.k8s.io/getting_started/gce/#creating-a…