-
What would be required to add support for the [FriendlyElec CM3588 NAS kit](https://www.friendlyelec.com/index.php?route=product/product&path=60&product_id=294) board? I have very little experience in…
-
Hi, using iproute 1.0.2 I have the following trouble
Linux **ip link** layout is
```
ip link
1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopb…
-
### What is the issue?
Running Tailscale on the host, upgraded to 1.66 this morning.
Right after the update, my Uptime Kuma Docker container stopped being able to ping my Tailscale IPs. I am ab…
-
### The problem
When route discovery runs against a Fortigate unit on firmware 7.2.x (7.0.x is ok) the Route attributes are returned as array items tripping up netmask2cidr()
./discovery.php -h …
smos updated
8 months ago
-
不晓得有没有人遭遇跟我一样的问题
在树莓4(debain bulleye)上运行完全正常的,搬到树莓5(debain bookworm),完全不起作用.
检查端口都是up,节点也是正常的,但是无法解析境外网站如facebook,google,可以解析百度
dig www.facebook.com @127.0.0.1 显示无法连接8.8.8.8
ss-tproxy status -x输出,…
-
Originally reported here: https://discuss.zerotier.com/t/version-1-12-0-require-iproute-instead-of-iproute2-on-raspbian/15385
We've confirmed that the fix is simply dropping this dependency from th…
-
For our use case, Following packages are need in AL2023 -
(a) Wiregarud
(b) IPROUTE2
(c) FRR -- Open Source routing protocol package
(d) SoftflowD - https://github.com/irino/softflowd -- F…
-
iproute2 has a "-b" param that can accept multi commands at a time, like this
https://github.com/ashi009/bestroutetb/issues/11
it's really useful when executing thousands of iproute2 commands.
-
大佬你好，又是我。当前遇到的问题是这样的：
在路由器多次重启之后，网卡会获得多个IPV6公网地址，当前脚本默认是从第一个记录获取数据，并没有判断该地址是否处于'detached'状态。导致更新出错。以下是状况实例。
 to transfer only banned trafic to tun0?