-
Make a new modular button box. first part is 3d printing second is soldering, shouldn't be to hard, code is already written. Come talk to me (Eric) for details
-
As a very long time user of home assistant, room assistant is amazing and helpful. I came across it when looking to solve a specific problem that it does not seem to support yet. That problem is local…
-
Hi sonnny
I was able to compile **spp_counter.c** in conjunction with the **standalone** directory.
But your example fails.
I have to change `include(pico_sdk_import.cmake)` into `include(../…
-
I used the precompiled MicroPython binaries v1.12 for my TTGO T-Display since June 2020 and it works very well. Recently I downloaded the binaries v1.17 and v1.18 and the same code no longer works. Fl…
-
### Describe the Problem
Unfortunately, I cannot now reproduce the problem, the hardware is behaving perfectly. But maybe you recognize something in the description and can give advice. Otherwise f…
-
i2c communication with current mode, reset, and selecting the different modes would allow control from open radios like the uBitx, and remove the need for physical buttons and LEDs.
-
Hi,
I'm trying to run the proyect on a Raspberry Pi 4 with Raspberry OS 32 bits with the Semtech SX1262 LoRa Module.
When running the receiver_listen.py or receiver_continuous.py shows the foll…
-
### Port, board and/or hardware
STM32, RP2
### MicroPython version
MicroPython v1.24.0-preview.31.g3c8089d1b on 2024-06-06; Raspberry Pi Pico with RP2040
### Reproduction
Pasted the following at …
-
Expected behavior:
I have an rpi-pico program where littlefs is used. I want to prepare the filesystem in my PC and then flash this filesystem into the rpi-pico. After filesystem is flashed into rpi-…
-
I am new to UPS PIco world. I just received 2 boards from PiModules (UPS PIco HV3.0B+ HAT Stack 450 PoE). Took a while to get them up and running. I've been making up circuits since my teenage year…