-
Distro: Arch Linux
OS: Win10 Pro
RDPWindows is running:
```
$ virsh start RDPWindows
error: Domain is already active
$ virsh list
Id Name State
----------------------------
1 …
-
First of all, thank you for your amazing work, this really helps me.
I've got a bunch of smc1500-2u's in remote locations, where it's impossible to use usb communications.
So my solution is to use …
-
Hello!
Thanks for sharing your work! I get some issues when I try to test it on my GoPro Hero10s.
I try to upload the code to ESP8266 through Arduino IDE, but I can't see anything in the serial …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
ftab updated
4 months ago
-
Apologies if I've written too much, but TL;DR = I'm stuck at `Failed to read firmware: unsupported flash type: 7f9d207f`
When I insert a drive into my ThermalTake SATA-USB disk station, `lsusb` rep…
-
I've just noticed your `bt-mqtt-gateway` project while searching for an alternative to the (likely abandoned) `third-party-openhab-bluetooth-binding`, see:
https://community.openhab.org/t/3rd-party-…
-
```
$ sudo ./edid-rw 4 | edid-decode
[sudo] password for shulhi:
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 06 af 3d 13 00 00 00 00 26 17
version: 01…
-
### Community Note
* Please vote on this issue by adding a 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to the original issue to help the com…
-
I am wanting to have some two way communication between 2 esp32s using ble. I have been able to run the Uart code on one esp32 operating as a server and have another receive data connected as a client…
-
The firmware has been updated again and EQ does not work anymore due to the changes.
@MrBearPresident
I'm willing to implement new EQ and probably some missing features on my own.
Could you assi…