-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Of course, to use M149, TEMPERATURE_UNITS_SUPPORT must be define in Configuration.h
When u…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I have not been able to identify well when it happens, but suddenly when sending G0 or G1 com…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
When printing, the extruder cooling fan does not turn on automatically
### Bug Timeline
i…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Bed leveling stops at second point without touching. After a while system goes to the …
-
**Update:** @vertigo235 set up a Discord server for this issue, if you'd like to discuss/work with people on the problem. Here's the link: https://discord.gg/hYUjSnW
This issue has been closed afte…
-
Preheats at 170 degrees must by 200 degrees. Screen freese every time at preheat.
Selecting a file and the printer is automaticly changeing filement.
Screen say E heating and thats it, nothing is ha…
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
I USE BOARD STM32F407 WITH ST7796 SPI ,25q16 flash
WHEN I USE TFT_COLOR_UI EVERYTHING WORKS GOOD
B…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
Extruders are not moving to the correct position when using firmware xyz offset. To demonstra…
-
So I flashed a new firmware 3.2 and did calibration (without any issues during calibration). Started to print a 20x20mm cube and encountered crash toward last 20 layers or so. In total, for each cub…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
For my self made cartesian Printer (dual extruder, BLTouch, Rumba32 board, future extruderlif…