-
Does anybody sucessfull make control led matrix 64x32 with mbi5153 (icn2053) led driver ic
New matrix P5 64x32 comes with new IC led driver (Same as P2.5 matrix)
P5 Matrix with mbi5038 (icn2038) i…
-
Hi, When transferring my micro-sd card and the hat from a perfectly functioning Raspberry Pi3B+ to a Pi4B, I get an SMI error:
/dev/smi no such file or directory...
Is the Pi4B not compatible or…
-
### What happened?
I've built GnuRadio many times on Ubuntu, now I'm trying to build it on
Raspberry Pi OS with desktop
Release date: September 22nd 2022
System: 32-bit
Kernel version: 5.15
…
-
This was seen in UEFI (Tiano Core) build for RPi3 with the latest VPU firmware. Symptoms: garbled UART output and DWC2 USB2 stopped working. Now, for USB the UEFI fw was querying mbox interface for th…
-
Hi there
How can I get the sense HAT working with increased I2C baud rate?
I started with an inverted pendulum project were I have a RPI 3 B+, a RPI sense HAT and an Adafruit Motor HAT. I stacke…
-
when pressure test was performed, write() to can0 will stuck, and the "dmesg | grep spi" will report:
`[13378.996137] mcp25xxfd spi0.0 can0: Something is wrong - we got a TEF interrupt but we were …
-
Hello,
I know it might be just a wish, but is it possible to use the Pixel Ring of the Core V2?
Or can someone help me with this?
I was able to bring my old Core V2 back to life thanks to this pro…
-
* Subject: WB3D, Optolink und grundsätzliches
* Wiki-Page: home
* From: mvatopenv
* Date: Wed, 19 Feb 2014 21:35:49 UT
* Message-ID:
Hallo,
langsam verzweifel ich an mir. Es gelingt mir einfach ni…
-
## The Problem
I ran tvheadend on raspian light with a Pi-TV-Hat without problems. To avoid double power consumption, I now tried to integrate it int HomeAssistant.
I installed the GauthamVarmaK's a…
-
@JSa1987 made some changes to the API to allow a better integration with Home Assistant. The idea is for PiHome to still run the whole logic but to be able to monitor the status from Home Assistant.
…