-
I have BMS JK-PBx working via CAN bus with Victron directly. But I would test your solution.
My config is multi-bms_JK-PB_RS485_mode2.yaml. And my device is this one:
![image](https://github.com/u…
-
KNOWN ISSUES
It is not compatible with ARDUINO LEONARDO and not tested under ARDUINO DUE and newer boards.
ARDUINO LEONARDO Boards aren't compatible with the add-on required for RS485 compatibility.…
-
Hallo,
EPEVER has a little device (eBox-Wifi-01) which connects to the RJ45 port of the tracer. After that you can use an Android App to read/set values.
Here: http://www.epsolarpv.com/en/index.p…
-
Attempting to sink nbt items (Forestry saplings, probably others) to a jabba barrel (also tried TE Caches) results in it thinking the inventory is full (switching to a basic pipe has the saplings go t…
-
I'm writing TWC software and using this repo as reference.
I've configured 2 TWC's, one master and one slave, and I'm sniffing the bus to watch the native communication, just to gain confidence that …
-
Hello everyone,
I've going through XBee's documentarion regarding micropython and its two modules, the XB3 and the XBee Cellular. My goal is to implement a Modbus protocol on top of the RS485, we o…
-
Hi,
I am trying to use your app to control DMX-512 components via USB,
the "Porta" scroll-down list is always empty,
I would like to ask how can I set the correct port?
Thanks alot.
-
-
Hello,
I am using the kondo motor model B3M-SB-1040-A:
I already changed some serial parameters like baudrate to 1500000, but when I try to publish a new angle to the topic /tx "values out of scope"…
-
I made my own firmware from the new sources and found a few bugs.
We have two Axpert Max hanging at home and one in the holiday home.
I also use “Solar Assistant” to control and set various function…