-
root@kali:~# cd kalibrate-rtl/
root@kali:~/kalibrate-rtl# ./bootstrap
root@kali:~/kalibrate-rtl# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build env…
-
Good afternoon everyone.
I write here to see if any of you know that installation errors I may have had to use the r820t2 in gnu radio companion.
I'm trying to make an FM receiver and other anal…
-
Hi, All
As we know GPS L1 is BPSK modulation so I think the baseband Q channel should be always "0" ?
But when I checked the Bin file which generated by the gps-sdr-sim (-b 8bit or 16bit) by using…
-
After re-installation on a new raspberry I ran into some issues.
I've got three remarks for the README.
When I follow it, there are two problems:
The installation of opencage gives me errors.
…
-
Through "d3d11-output-csp=pq" you can automatically activate the HDR API of the graphics card. This is much better than manually opening the HDR of WIN10, but it will also force the activation of HDR …
-
When usb is unplugged and re-plugged in, or if there's a bad usb connection, the program will stop processing data and remain idle. And I have to restart the service.
Is there a way to solve this?
-
At the moment, SDR++ allows only integer UI scaling options: 100%, 200%, etc. But for some displays, 100% is too small and 200% is too huge. It would be nice to gain some level of fractional scaling s…
-
In the SDR Receiver options there are 2 checkboxes (under Enable AIS reception) labelled Channel A and Channel B. You can only select one at a time. Does this mean AIS is only listening to one channel…
-
Hi,
I have built the branch v2 and using for SatNOGS Raspberry PI 4, according to this thread:
[https://community.libre.space/t/new-airspy-r2-mini-driver-development/9768/26](https://community.libre…
-
The part for U5 (3.3V LDO) in HW/pocket_sdr_v.2.1.xlsx is not suitable. The output voltage of the LDO may be 5V instead of 3.3V by the current circuit design.
Replace the part for U5 by the proper …