-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
I installed the Arduino software as described in the manual.
Compilation errors:
TFT_ESPI : don't support DMA on ESP32-S3
LVGL : missing file lv_conf.h
-
Over the years, many Qubes users on the mailing lists have expressed the desire to be able to run some kind of Android VM (e.g., HVM) under Qubes OS.
-
I am trying to flash an xperia XZ1 with flashtool since it has become bricked when I rooted it with TWRP, but when it is in the process of flashing, it stops at nothing and does nothing but turn off a…
-
Device Alldocube M5XS
booted AOSP 10.0 v204 & v205(not booting) to android logo (only) [Not booting fully]
(
[v204_logs.zip](https://github.com/phhusson/treble_experimentations/files/3926477/v204_l…
-
During Hack'n'Hike #4989 we had a x86 notebook, where I (and others) did not manage to disable the UEFI secure boot feature in the boot menu, which excludes Sculpt to be testable easily.
Even so a…
-
Hi, and thanks for sharing your work !
I was gifted a [Chinese copy of the EleksTube](https://www.ipstube.com/en/product/IPStube-401.html), and decided to see if I could reverse-engineer it. Doing …
-
路由一直使用正常，经常几个月都没有重启也没有问题，最近装了XX后，路由就不定时重启了，但发现一个规律，如果终端一直连接墙外，连续几个小时也没有问题，但如果终端长时间没有连到墙外（比如一两个小时），突然一连接的时候，大约有75%的机会会路由器重启，请问是路由器的问题，还是XX的问题啊？
路由是128M RAM，16M FLASH
-
Hey, just reaching out since I'm diving into the same but with less experience.
I've tied to UART and USB but on fastboot I don't get a green ring on the device, neither fastboot lists the device.…
-
I'm using a [AT25SF321B](https://www.mouser.com/datasheet/2/698/adet_s_a0010543939_1-2956529.pdf) as the SPI flash for an ESP32-D0WD-V3 IC. I can successfully detect the flash chip, but the size isn't…