-
Hi, I encounter the same problem as in https://github.com/facebookresearch/LAMA/issues/10.
And I found the reason why 2 examples are filtered is that the `obj_label` are `1970s` and `1990s`. And in `…
-
Hello,
Switches are not supported in Apple Home. Could you add Generic Switch device example?
Regards
lboue updated
4 months ago
-
**What happened**:
When I start a test vm with command `virtctl start testvm`, vm not working correctly.
```
Message: 0/3 nodes are available: 1 node(s) had untolerated taint …
-
Hi there,
Firstly, thanks for writing this - I have frankensteined a Psion 5mx together and want to try to use it!
I have got the build to work - only change was I had to install GNU install so…
-
Hi -- I can't get Watchy to accept an upload from the Arduino IDE under either MacOS Big Sur or Windows 10 on my Intel iMac. I have installed the CP2104 drivers under both environments, and tried vary…
-
I am using ubuntu 22.04 LTS and ros2 Humble
```
rp4@rp4-desktop:~/magician_ros2_control_system_ws$ lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6…
-
![DSC03121](https://github.com/geerlingguy/sbc-reviews/assets/481677/c39414ee-bea6-482b-bc29-e271f510f7d1)
> **NOTE**: The board used for this testing was a pre-release revision. The final producti…
-
### The problem
I realised this morning, that all my ZHA and Matter devices have been marked as "not available" in the GUI. When all the ZHA / Matter devices went offline there was no user interact…
-
Hi, Im trying to do the python flash with the SSH, I'm doing it on the Home Assistant OS SSH,
Im getting this error ..
```
/zigbee python3 cc2538-bsl.py -p /dev/ttyUSB0 -evw CC1352P2_CC2652P_l…
-
### Description of the issue
Hi all,
I was gifted a EFR32MG21 based ZB-GW04 dongle that seems to work.
`# python3 Elelabs_EzspFwUtility.py probe -p /dev/ttyUSB0
2023/12/08 13:00:04 Elelabs_EzspF…