-
```
What steps will reproduce the problem?
I am using iteadstudio GBOARd with SIMCOM900 and SD.
http://iteadstudio.com/store/index.php?main_page=product_info&products_id=537
Arduino Ide 1.0.1
Simcom …
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino and change the phone number together with the
country code
2. Change the TxRx pins on my shield to pin 2&3 which stated in…
-
```
Hello guys.
I've been working on an interfacing system of GSM Shield SM5100-B with Arduino
UNO Rev 3. and a keypad and an LCD.
when I used the example to send an SMS from the Arduino staticall…
-
```
What steps will reproduce the problem?
I am using the code of the GSM_GPRSLibrarySMS. The called function is:
gsm.readSMS(smsbuffer, 160, n, 20)
One function call will need exactly 10s which caus…
-
```
GSM Shield testing.
ERROR: SIM900 doesn't answer. Check power and serial pins in GSM.cpp
status=IDLE
I have the power supply connected 10V 2A.
I have the libraries downloaded and installed.
i ha…
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino and change the phone number together with the
country code
2. Change the TxRx pins on my shield to pin 2&3 which stated in…
-
```
Hello guys.
I've been working on an interfacing system of GSM Shield SM5100-B with Arduino
UNO Rev 3. and a keypad and an LCD.
when I used the example to send an SMS from the Arduino staticall…
-
```
I'm using Arduino Mega 2560 with IComSat GSM shield.
I've already trim the pins 1 and 2 of the shield(the ones below arduino's pin 1
and 0) so I must use these ones :p
The codes of the library on…
-
```
What steps will reproduce the problem?
1. On Arduino 1.0.1, open the Library_Client example the is distributed with
the package.
2. Configure the service provider GPRS details.
3. Upload the sket…
-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
This appears in the Serial Monitor:
GSM Shield testing.
DB:ELSE
DB:ELSE
DB:ELSE
DB:CORRECT B…