-
## Reducing D-Bus traffic - increasing scalability
For example a solar charger, sends multiple PropertiesChanged signals every second, one for each D-Bus path. Also cgwacs and dbus-fronius do: 9 si…
-
I'm using the variables sensor.envoy_xxx_current_power_production and sensor.envoy_xxx_today_s_energy_production to show my production /current and daily) and same for consumption.
Consumption is O…
-
Hi,
I occasionally have a problem when charging does not start when requested. If I restart the WiFi Firmware it will then being and operate without issue. What debug mode setting should I turn on an…
-
Hello,
SOLIS Hybrid 3K Inverter. I use solarman to get the values from the inverter and solismod through mqtt to poke some of the settings for battery charging etc.
I'm running HA core 2024.2, upg…
-
Hi
I have mosquitto on homeassistant. I had a file named "Cerbobridge.conf" in the folder share/mosquitto in homeassistant. With the the file contained:
connection CerboGX
address 192.168.1.104
…
-
Hi David,
The sensor „Total Battery Life Cycles“ and Battery SOH shows low/high values in my opinion.
![IMG_5688](https://github.com/user-attachments/assets/e3e529b6-cc65-4a07-86a4-f466d36a1355)…
-
Hello,
does this repository support SPF 5000 ES and the usb of the inverter must be connected to the HA server?
Thanks for your response.
-
It would be great to see batt level (%) and batt power (W) for automation purposes
Pe245 updated
2 years ago
-
**THIS IS MY STORY ABOUT A FULL BREAK DOWN OVER NIGHT** which killed 8 growatt inverter "reportings"/monitoring
I had to deal with some flaws in our WLAN and network, I rewired the LAN cables, adde…
-
Tried to use my AP EasyPower App login data, but authentification failed. Is this client usable for the EZ1-M inverter?