-
### Hardware:
Board: ?ESP32 Dev Module? ?node32? ?ttgo_lora?
Core Installation version: ?1.0.0? ?1.0.1-rc4? ?1.0.1? ?1.0.1-git? ?1.0.2? ?1.0.3?
IDE name: ?Arduino IDE? ?Platform.io? ?I…
TD-er updated
3 years ago
-
### Subject of the issue
I need to modify the OpenLog code - but when I build it the ICM init() function fails "ICM-20948 failed to init"
Also found I had to fix a few things to even get it to compi…
-
### Description of defect
No code written for my Artemis Thing Plus board work with Mbed OS V6.7
I know Sparkfun also burns their special "SparkFun Variable Bootloader" (SVL) so these boards hav…
-
The HX711 load cell ADC is used as a bed level sensor on the upcoming [Creality CR-6](https://www.creality.com/cr-6-se-3d-printer-back-us-to-save-100-p00296p1.html) series of printers. It works by tre…
-
ref: https://github.com/adafruit/Adafruit_nRF52_Bootloader/issues/63#issuecomment-
I'd appreciate that. It might actually be working, but possibly I am missing a step. I downloaded your project a…
-
I downloaded and installed the latest code from master a few hours ago. Example 03_http_request will not work - the ESP32 wifi stack will not connect to my local router:
....
I (249769) wi…
-
A feature in the Config_adv to allow the connection of I2C pin expanders.
It could look something like this:
#define I2C_PIN_EXPANDER
#if defined I2C_PIN_EXPANDER
#define PIN_EXPANDER_ADDRESS
…
-
Thank you for setting this up. I have an Arduino board and Zehnder Comfoair q450 ventilation unit and i would like to communicate with ventilation unit. Can you please elaborate hardware setup more? A…
-
Hello,
I have successfully compiled and uploaded the Example 7 to my esp32 board. I am using the M5Stick-C. I also edited the code of the example to match the pins I am using (32 and 33). The iOS a…
-
Has anyone tried using this library with the new Raspberry Pi Pico and its new RP2040 chip? It seems like it should be easy, but since I have only personally used the RF24 library inside the Arduino e…