-
Update the PCB. Improvements should include:
Allow robot to run from higher voltage minimum 4 AA batteries
Measure battery voltage in place of temperature
Allow safe connection of USB without turni…
-
There's quite a bit of pre-ample in the Gutenberg books - I think it's possible to skip this - just not sure how at the moment.
-
**I want to send photo from my IP camera, but when I trying to send it gives me error. (Example up: 192.168.1.90/shot.jpg)**
-
Hi,when build the code
it notes fail like below,would you please give me a hand
/home/king5/code/esp-idf/components/fatfs/src/ff.c:541:19: error: 'Ct855' defined but not used [-Werror=unused-con…
-
> Have you searched for existing (open and closed) issues describing the same problem?
Yes
**Describe the error**
It seems that the non existing settings can not be accessed and the hash can no…
-
I can connect to my MaixPy via serial cable and I get the MaixPy welcome screen, but it doesn't respond at all to my keystrokes. I'm running minicom on Linux Mint connected to /dev/ttyACM0 at 115200 w…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
Can I flash this firmware directly using builtin ESPEasy firmware update utility (web interface)?
Thanks
-
Getting a crash on a wemos d1 mini (and also on the Feather Huzzah ESP8266 ) after a few minutes of the device trying to reconnect to the wifi router. The router's running openwrt and is about 8 feet …
-
Can you publish a UF2 file to upload to an ESP32 Supreme.
Frank
Toogo updated
8 months ago