-
hello todey try use this project [All Band Receiver with SSB Support Using arduino pro mini3.3v and Si4735](https://create.arduino.cc/projecthub/pu2clr/all-band-receiver-with-ssb-support-using-si473…
-
I was dealing with QR Code generation on Arduino with Richard Moore QRCode library and printing on TFT LCD (Adafruit ST7735 ) device.
I used this library in my webpage and when reading that QR code, …
-
Hello,
This is very interesting project and would like to work with this. I am using pocketbeagle plus qqvga LCD (ST7735) and the code seems working pretty well. But you know, sometimes image transf…
-
Hi,
I got an issue while trying to padding text as a picture below. It creates black verical line after `setTextPadding()` is being used (`_fillbg` is set). I've try to debugging with `PADDING_DEBUG`…
-
This works fine if no SD card is fitted, showing a `/flash` directory with contents. If a card is fitted, the progress gets to 50% then stops.
-
Hello,
I could not use the existing tools online and offline to convert JPG files into the PROGMEM array.
Can you please specify which tool did you use to create the EagleEye, Baboon40, etc. and oth…
-
### Board
esp-wrover-kit
### Device Description
Custom board with esp32-wrover-E ( 16mb flash 8mb psram )
### Hardware Configuration
ETH_Lan8720 -> Ethernet
DS3231 -> RTC
ST7735 -> Display
H…
-
This beautiful library works fine with my ESPboy device www.espboy.com
Please add ESPboy to the "Currently Supported Dev Device"
**ESPboy (ESP8266 + ST7735 128x128) www.espboy.com**
```
#i…
-
发现自带的dynablocks不支持esp32下的1.8‘’TFT(st7735),不知能否增加,又或者本身是支持的,我接错了引脚。
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Standalone pip3 esphome 1.16.2
Standalone pip3 esphome 1.16.2
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP32, M5Stick-C
…