-
Dear Sir,
I am very interesting with your ideas to make open BVM machine.
Currently, I try to realize your Open BVM by printed your STL data...Done.
I have a problem for Assy Planetary gear. To m…
-
I just set up my whole system and everything powered on and worked but when I went to test the movement of the leadscrew it was barely moving. I put it into thread mode to cut a 8 tpi thread and it en…
-
Hi there,
I'm trying to build a CNC coreXY machine.
I configured grbl to coreXY, and sets $100 and $101 to 80. But, my motors dont turns at the same speed.
One is really fast, the other seems mor…
-
Flashed your bin file for the Smartthings integration. Flash went fine on a brand new nodemcu board. Parent device created properly as I've created a dozen or so with the ST Anything parent/child devi…
-
I have the project up and running on my G0752Z lathe. When I attempt to thread 13 TPI it comes out about 16TPI, and when I thread at 24 TPI it comes out around 32 TPI. I know the lead screw is set one…
-
Hi All,
I have read through multiple threads but it seems that I'm reporting something new/unseen so far.
My Setup is Eleksmaker Mana SE v3.2 + grbl1.1g, I have upgraded X - Stepper Driver, and …
-
@jonmagic is an english version of the robot hardware assembly anywhere? I took a quick look but didn't see it.
1. we should also make a parts list. if you share yours I'll probably order a bunch of…
-
Hello,
When I use this, my X turns both ways but my Y and Z turn only one way and vibrates the other way.
How do I fix this?
-
Hi! First of all, this is amazing, well done!
You mentioned in your blog that it's limited to about a 45° FOV in two axes. Could you mount it on a stepper motor to rotate the transducers in one or …
-
Hello,
I ran into a situation where a pair of axis (z-axis, but I think it could just as well happen with the y-axis) got misaligned.
While using the cnc functionality, I accidentally lowered th…