-
Compiling version 1.21.0 using ESP-IDF 5.0.4 for an esp32-s3 with octal SPIRAM I am getting the following warnings.
This is the make command I am using
```
make BOARD=ESP32_GENERIC_S3 BOARD_VA…
-
### CircuitPython version
```python
since PR#9325
```
### Code/REPL
```python
def send_file_to_host(src_filename, dst_file, filesize, buf_size):
import sys
import binascii
try:
with …
-
Transmission and generation of non-recorded data (GEN_FLAGS) are slow
- TinyUSB is faster, but has to be tested (transmission)
- Use Rust to decode and generate flags instead of TS?
-
Throwing any exception causes board to hang. Supposedly exception handling works with the nRF8240 using the Nordic SDK and with Zephyr, so the chip is capable of it. Not sure what else to try and wou…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.3-dirty on 2024-04-10; SparkFun Pro Micro RP2040 with rp2040
```
### Code/REPL
```python
# code.py:
import board
import…
braye updated
4 months ago
-
Hi, I've tried to implement 96KHz support but I get weird pitch and distorted audio apparently because there's some sample rate mismatch inside the audio system that creates this issue and I would lik…
-
Is there out of the box support for the Adafruit Feather RP2040 DVI?
I'm happy to try and add this if someone can point me in the right direction - I have no idea how cmake works, so I'm slightly l…
-
### Operating System
Windows 10
### Arduino IDE version
1.8.19
### Board
Adafruit KB2040
### ArduinoCore version
Arduino-pico 3.7.2
### TinyUSB Library version
2.4.0 ... 3.1.1
### Sketch as …
-
i am using arduino ide 2.1.1
and the board is uno r4 wifi
the error is :
#include errors detected. Please update your includePath. Squiggles are disabled for this translation unit (D:\IntroUnoR4W…
-
What would need to be done to add MIDI USB Host support ...I have MIDI kit, time, patience, reasonable programming skillz, and very little knowledge about low-level USB.