-
I'm trying to have ubxlib communicate with a ZED-F9R from a nRF5340 over SPI.
I can show ubxlib successfully using I2C from a nRF52840 to a NEO-M8U.
I've done my best combining [pos_main.c](https:…
-
### Describe the bug
When "GPS Rescue" is enabled as stage 2 failsafe, the GPS position shown in the OSD and used for BF rescue mode has an offset of about plus 10 seconds to the real position of t…
-
I bought a SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic), and am connecting to an ESP32 board (OLIMEX ESP32 ISO POE) via the RX, TX, and PPS pins (not using I2C).
Originally, I had a sketch th…
-
The tutorial on the landing page is missing a dash in one of the steps.
https://github.com/Stefal/rtkbase
Manual installation:
8. If you didn't have already configure your gnss receiver, you mu…
-
measure, compensate and display. Variation/Declination and inclination!
A fixed value for one location might be unsufficient for long flights and or usage of the variometer in a different geogr…
-
Hello,
I've implemented a code using some libraries such as SoftwareSerial and NewPing in my arduino code. I have named my .ino file to .sketch and run the commands below:
`make BOARD=arduino-un…
-
Hello everyone,
I'm developing a custom board that uses a Ublox Neo-M9N module. The main microcontroller is an ESP32-S3.
I'm able to communicate with UART with no issues.
I'd like to ask, from y…
-
**Is your feature request related to a problem? Please describe.**
Not a problem, just an idea. It would be really nice to have displayed the current estimate of the filter position accuracy. For exa…
-
### Subject of the issue
We are using some RTK Express to log data when we walk or drive.
Instead of one file for each trip, we have a lot of files, drops inside the files, and too much float or sin…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…