-
Hi!
Trying to get the PS4 camera running in Windows 8.1 using this code. Successfully compiled it and uploaded the firmware, after which the device is detected as a camera. But there is no output in …
-
I am currently using this for mapping a room. Using this for the positional information with a stereo camera and then apply transformations to the point clouds created using the camera relative to the…
ghost updated
4 years ago
-
It seems that in Linux, the numbering of the /dev/video (V4L) devices is used to determine which source should use which webcam. This should not be the case, as this numbering is not p…
-
Hey guys so this is what I get. I am trying to use my Logitec camera and I cannot seem to get my image.
pi@raspberrypi /dev $ fswebcam -f image.mjpg -v
--- Opening /dev/video0...
Trying source module…
-
Hello
I have same issue as mentioned in #159 it is marked as resolved but I have same problem with most recent version.
command:
```
ffmpeg -f video4linux2 -video_size 800x600 -i /dev/video0 -vfra…
-
Hi,
Do you think about make a python wrapper ? o.0
Cheers
-
I may or may not have time to implement this myself and submit a pull request, but we have a new open-source driver for RealSense cameras that is fully cross-platform (no need for the separate libuvc …
-
I was curious if your plugin supported, or had the capacity to support live streaming via either an elementary H264 or fragmented MP4 stream.
In one of our projects, we have a camera which is strea…
-
I believe Motion JPEG(mjpeg) cameras are not supported in current released ROS packages. Is it correct?
- libuvc_camera [requires libuvc > v0.0.5](https://github.com/ros-drivers/libuvc_ros/blob/0f9…
7675t updated
6 years ago
-
Hi,
I use a cloud-key gen2 plus. Is it possible to also add these camera's?
Hope to hear from you
Regards François