-
I was trying to replicate the set up given in the following link:
http://wiznetmuseum.com/portfolio-items/ble-to-ethernet-thin-gateway/
connections between NRF51 and wiznet board are done as men…
-
Board: ESP8266-12E using a NodeMCU v1.0 dev board.
Library: ESP8266 Arduino library version: 1.6.5-947-g39819F0
IDE: Arduno 1.6.6 or visual studios with visual micro
I am following up on this issue …
-
Hi ,with this libraries can read data from GET url? template:
192.168.0.15/action?name=value&name1=value1&name2=value2
I will read information,
but get only action.
Maybe can help? I will use f…
-
This happens on W5500 but since the code is mostly shared with other W5x00 I imagine the problem exists there too.
The following code works. Comment out the end()/begin() in ::on_disconnect and it …
-
Hello,
I found a error in a code snippet at https://playground.arduino.cc/Code/Email . There was a 500-unrecognized command error with the code in first snippet.
The correct working program is bel…
-
Hi , I ve many problems wit not updated library of wiznet of 5500 , this board is important because is a few models wit a low price can give a macaddress inside board .
I ask if someone can help me…
-
Sorry wasnt really sure where else to ask, but is this ethernet interface supported? I tried to see if the ESP8266 would cover it but i came back with mixed answers.
if it is not supported what wou…
-
| Required Info | |
|---|---|
| Camera Model | SR300 |
| Firmware Version | |
| Operating System & Version | Ubuntu 16.04 LTS |
| Kernel Version (Linux Only) | 4.4.0-57-generic |
| Bui…
-
Arduino/libraries/Ethernet (W5100 chip)
In the Ethernet Shield there are some status leds: PWR, LINK, 100M...
How could I get the "LINK" status from my code?
-
HI,
I believe this library can be used to send sACN onto a network? Do you have any example code of the library being used in an output situation?
Thanks