-
各位尊敬的作者，我在使用Mesh-Lite功能是遇到了一些问题，希望大家能帮我解决。具体问题如下：
我是使用mesh_local_control为模板创建的工程，并且使用TCP协议和上位机连接，主要功能是Mesh-Lite的重建网络功能。
我在测试Mesh-Lite网络丢失根节点后的重建网络的能力。发现会有很大的概率无法重建网络，或者是部分模块无法加入到重新建立的网络中。 具体的日志都停止在检…
-
This is both for firmware and software. Here are features that needs to be implemented:
- [ ] Tracker creates an AP with configuration protal, if it can't connect to any wifi network (pr #59 alread…
-
I've tried for the first time the example echobot using an arduino nano 33 iot and the classical arduino ide. I have created a bot using botfather. I have uploaded the code of the example on the board…
-
_Arch Linux, Labwc, old Thinkpad_.
Hi, when I first open the laptop the wifi icon is shown correctly, tooltip shows wifi info but after I close the lid and it goes to sleep and open it and it wakes u…
-
I would like to initialize the Wifi interface in ApSta mode and later disable the access point (and switch to Sta mode). This is so that the device can be accessed via the access point to configure it…
-
I have same network connected thru wifi and ethernet at the same time.
When I enable proxy inside the app (`MacOS Proxy Manager`) those settings are applied only to one of the networks (in my case i…
-
**Home Assistant Android version:**
WearOS version `beta-1626-edc4142`
Phone version `beta-1626-edc4142-full`
**Android version:**
WearOS 2.33
Android 11
**Phone model:**
OnePlus 7 Pro
**Home …
-
### Documentation issues
I find the wording in section 11.9.7.1 ("ScanNetworks Command") unclear, **specifically** for the case when NON-concurrent commissioning flow is used (and indicated as such…
-
on latest master code https://github.com/openwrt/openwrt/commit/cbfce9236754700a343632fff8e035acbc1b1384
AP + STA never work on 5G wifi
sta connected ok but AP no signal
channel is 44
mt76 drive…
-
NanoPi R2S Plus SBC has a WiFi module based on RTL8822CS.
In LuCI I choose Network → Wireless, then Add one 5 Ghz network (select channel manually), Save & Apply.
After confirming that my 5 GHz SS…