-
I'm trying to tie this into apple homekit and I'm trying to figure out what would have the least impact on this device. Homekit has some things that might link up to this, and I already have some Hue…
-
### What happened?
When setting mA/LED to Custom, the value of mA is set to 55 and other values are not saved
### To Reproduce Bug
Set mA/LED to Custom, change mA to 30 and hit save...
### Expecte…
-
Hello
I would be very happy if it were possible to change the text for the "scrolling text" effect using an object.
So far I haven't found a way to define the text for the ticker.
best regards👋🏻
-
### What happened?
If I use sACN input I would need it to work with maximum priority. Unfortunately I noticed even if UI shows that it receives E1.31 the leds are off or on brightness smaller then ex…
-
"Lumitech" values are not displayed via the LightController (First red box). The output via the individual module is possible (2. red box).
In addition, the individual module is read only.
For the…
-
**Checklist:**
- [X ] I updated to the latest version available
- [X ] I cleared the cache of my browser
**Release with the issue:** First, i am not sure if this is a bug or just a missing feat…
-
**Is your feature request related to a problem? Please describe.**
Not really, if you could tell the device what binary to grab I could do the updates from within HA directly.
**Describe the sol…
-
**Is your feature request related to a problem? Please describe.**
No problem. :)
**Describe the solution you'd like**
I have multiple ESP32 S3 boards and would like to install WLED onto them. Ho…
-
### What happened?
I am using a non-addressable 5050 RGB LED strip, I set up the MOSFET circuit and tried using PWM RGB and the pins, but I couldn't get any results. I don't know what I'm doing wrong…
-
### What happened?
I have a 4 port WLED board made by Wasatch Pixels. I am only using 2 of the 4 ports and I am using xlights to upload the configuration. Because I am only using 2 ports, xligh…