-
```
To trigger a camera shutter or any other event driven payload (water drop,
parachute, etc.) please add a TRIGGER command.
It should have these characteristics:
Use either the relay or a servo
Co…
-
```
To trigger a camera shutter or any other event driven payload (water drop,
parachute, etc.) please add a TRIGGER command.
It should have these characteristics:
Use either the relay or a servo
Co…
-
```
To trigger a camera shutter or any other event driven payload (water drop,
parachute, etc.) please add a TRIGGER command.
It should have these characteristics:
Use either the relay or a servo
Co…
-
```
To trigger a camera shutter or any other event driven payload (water drop,
parachute, etc.) please add a TRIGGER command.
It should have these characteristics:
Use either the relay or a servo
Co…
-
### Prerequisites
* [X] Put an X between the brackets on this line if you have done all of the following: ...
### Description
The wrong context menu is sometimes displayed by the Markdown Pre…
-
```
In Mission Planner - Flight Planner parameter prompt
Command off(0)/on(1) Delay(s)
DO_SET_RELAY 0 x
Should be:
Command off(0)/on(1) Second Parameter can be any numbe…
-
```
In Mission Planner - Flight Planner parameter prompt
Command off(0)/on(1) Delay(s)
DO_SET_RELAY 0 x
Should be:
Command off(0)/on(1) Second Parameter can be any numbe…
-
```
In Mission Planner - Flight Planner parameter prompt
Command off(0)/on(1) Delay(s)
DO_SET_RELAY 0 x
Should be:
Command off(0)/on(1) Second Parameter can be any numbe…
-
### Issue and Steps to Reproduce
I don't see any completions after writing some swift and building the package.
### Expected Behavior
After I write some swift, build the package I should see comple…
-
例:多开微信,基于Android for Work(如MIUI多开,Island)
问题1:操作APP会同时操作两个APP,这个影响不大。
问题2:GCM代收会无法区分应用;
比如微信A和微信B,微信B为被多开应用,收到GCM推送后,都是通过包名打开的微信A。
MIUI在多开的情况下,谷歌套件也会自动被多开。
X-APM会识别两套GCM分别的推送消息,但是无法区分。
不知这…