-
APMPlanner2 is of limited use for boat control, it can't show wind or rudder/sail states graphically and doesn't have nautical charts. Write a plugin for sending NMEA to OpenCPN over a serial/xbee lin…
-
I'd like to start a discussion on how to back up the network key on XBee coordinators.
The issue is that on XBee devices the network key is write-only, so we have to remember it from the moment we se…
-
- [x] error check
- [ ] test run
- [ ] final test
-
Hello, great library! I am using it in another project and I have some issues under Windows, as I can't install the node-serialport dependency. Can you update the package.json file so it uses so the l…
-
It seems like the xsens 700 must be first manually set up to output data in correct frame (NED or NWU?), otherwise the driver will output the data in the wrong coordinate system.
Would be good if the …
flixr updated
6 years ago
-
How do I use this library to set the parameters/values of an at command via api mode.
Say for instance, I want to set up the pan ID as as say 23 so ATID = 23. How do I do this via the api mode. the e…
-
```
What steps will reproduce the problem?
1. Trying to issue an 'ND' command (API mode) and later parsing it (the problem
is in the parsing).
For example:
xbee.send("at", frame='A', command='N…
-
```
What steps will reproduce the problem?
1. Trying to issue an 'ND' command (API mode) and later parsing it (the problem
is in the parsing).
For example:
xbee.send("at", frame='A', command='N…
-
**What steps will reproduce the problem?**
1. Trying to issue an 'ND' command (API mode) and later parsing it (the problem is in the parsing).
For example:
xbee.send("at", frame='A', command='N…
-
Hi,
Is there any update on the ZigBee device support? My spark fun Xbee module has successfully recognized a ZigBee Endpoint device (HA smart switch). But I don't see any new device logo on the web U…