-
https://luoyuxuanryan.github.io/posts/187b1260.html#more
数据库 安装 MySQL
-
The interface for my thermostat is all done in Fahrenheit, however my UI is set to use Celsius. This means that you get a slight rounding error when setting the temperature which causes keep retrying …
-
Hi
when I try in igbee2MQTT to update a setting in Reporting, eg Min Rep Interval for Temperature/measuredValue, I receive the following error
2024-08-18 10:22:28z2m: Request 'zigbee2mqtt/bridge…
-
### What happened?
The Namron thermostat outlet plug (4512749-N) does support thermostat mode, but this is not added in z2m.
Can someone add this support?
### What did you expect to happe…
-
Default baud rate speed is now 115200.
But might 230400 not be more future proof for Espressif Zigbee NCP Serial Protocol as a Zigbee Coordinator for zigpy / ZHA?
And should the same recommendat…
Hedda updated
2 months ago
-
I had a thermometer flashed via OTA and successfully paired to my Zigbee network, but then I recreated the network while switching from Z2T to ZHA. Now my thermometer cannot be paired with my new netw…
-
Note! This request is for ZDongle-E with Zigbee Coordinator firmware (and not related to request with "Zigbee Router firmware").
@Daniel-zhan-itead Can you enable "touchlink" (touchlinking) support…
-
### What happened?
I am succesfully using Z2M to interact with the Sinope TH1300ZB thermostat.
unfortunately it is missing 2 important read attributes from the "manuSpecificSinope" cluster:
Flo…
-
### The problem
I'm running Home Assistant in a Docker container with three USB adapters: a DSMR Smart Meter (`ttyACM0`), a Conbee Zigbee adapter (`ttyACM1`) and a Bluetooth adapter (`ttyUSB0`). Sinc…
-
### Problem description
The device TS0601 from _TZE204_pcdmj88b can be recognized by HA with ZHA but no parameter is visible.
Zigbee info
IEEE: a4:c1:38:53:be:4a:a6:a9
Nwk: 0xf92e
Device Type: …