-
Not able to run the web server on Raspberry Pi Pico W whereas the same code running fine in ESP.
web_server:
port: 80
![image](https://github.com/maxgerhardt/platform-raspberrypi/assets/51466…
-
### The problem
All was fine, but recently when I upload firmware via OTA or simply build firmware bin file, I got a bunch of compile errors, segmentation faults etc... They seem to be completely r…
-
### Please describe your issue.
Im having an issue where I set my guitar controller to emulate a PS3 controller but now it's stuck in that mode and when I press "revert back to Arduino", the loading …
-
I cannot get the WS2812 leds to be set correctly immediately following a reset - e.g. the code below should switch all the leds off.
The code is a cut down version of the problem, which can be run …
-
When trying the PiJuice on Pi 4B using Raspbian Buster out of the box we get a COMMUNICATION ERROR in the PiJuice software although i2cdetect reported the usual addresses (0x14 and 0x68).
Turned ou…
-
**Describe the bug**
https://docs.wokwi.com/parts/wokwi-pi-pico#exporting-uf2-binary
doesn't work. As in, the UF2 file is not accepted by the Pi Pico bootloader.
**To Reproduce**
Project is her…
-
**Application Version**
3.6.0
**Platform**
Win 10
**Printer**
Creality CR10
**Steps to Reproduce**
Run Cura then try to open any serial port COMx
**Actual Results**
Access error indic…
-
I would be nice to have a library that generates tones inside the pico-sdk.
A lot of people is familiar with the [`tone()`](https://www.arduino.cc/reference/en/language/functions/advanced-io/tone/)…
-
I modified pico_ice_default and pico-ice-sdk/examples/pico_usb_uart with line_coding detection and 1200 bitrate detection for autoreboot. This is very useful if we need a higher bitrate than 115200, a…
-
Hello, I have IoT project with TFT display, When I try to migrate from Firebase Esp32 to FirebaseClient, this error appears when I want to upload the code to my ESP32. But if i remove the `#include ` …