-
I am into Sitronix ST7735 style (e.g. ili9341, ili9488 and the like) TFT controllers. I am also working with different TCs (STMPE811, XPT2046 etc.)
I am interested in a more ESP-IDF-ish driver infras…
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** - MK3S
**Describe the bug**
Getting…
-
In the simulation the MCU Atmega1284, Atmega644, Atmega324 and Atmega164 didn't even oscillate the pin to flash the LED.
I managed to make the Atmega1284 work using MPLAX and XC8.
https://github…
-
After setting fuses i cant get it to show up. Guess something went wrong but cant understand what.
![image](https://github.com/xyphro/UsbGpib/assets/6376257/723b2c64-2e08-4805-b57d-ae0db311f7af)
-
The test test_ms_inline_asm will fail on architectures such as Aarch64. It may be good to either run it if architecture is detected to be x86_64 or make it an optional test.
-
Hi there,
Tried back from #771, I tried today to build for my Mac M1 and and can't get the compile process going correctly to end on M1 silicon (I tried to investigate but each time I pass a new st…
-
Hello,
I encountered an issue with the atmelavr platform - I could do the upload, but setting fuses failed - the path to avrdude.exe contained spaces and therefore it was not found, I found a simil…
-
### Describe the problem
When going to File, Examples, I would expect to see examples broken into a few categories: Built-in examples; Examples from Custom Libraries; and Examples for XXXX where XXXX…
-
For XMEGA(256A3).
From: https://github.com/NationalSecurityAgency/ghidra/blob/master/Ghidra/Processors/Atmel/data/languages/avr8.sinc
```
# AVR processors with more than 64 KiB of RAM make use of…
-
Followed instructions as best as I could (first time using Arduino) and as I go to verify and/or upload the .ino it gives an error message in the subject line. Any ideas where I went wrong? I am using…