-
Hallo Zusammen.
Vorab schon mal danke bei der Lösungsfindung.
Es geht um einen Anycubic mega x. Ein ähnliches Verhalten wie bei Artikel #https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEG…
-
He activado la auto nivelación siguiendo las instrucciones y la altura del hotend me salía -8.4.
#define X_PROBE_OFFSET_FROM_EXTRUDER -22
#define Y_PROBE_OFFSET_FROM_EXTRUDER -26.7
#define Z_PRO…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
No error is generated. But I humbly believe that it requires some change or improvement in th…
-
Hey,
I've just recently finished building my Smartrapcore (Wooden) and pretty much everything works except the auto bed leveling. I'm using Marlin 1.0.2-1.
Technically it woks (I've done prints), I …
-
When I try to compile Marlin on Raspberry (with Arduino 1.0.5) I get this error:
```
CC /usr/share/arduino/hardware/arduino/cores/arduino/wiring.c
CC /usr/share/arduino/hardware/arduino/cores/a…
-
i build a new prusa i2 with a capacitiv sensor for auto bed leveling, the sensing itself works fine. I couldnt test the createt Matrix if its correct, but if i start to print the auto bed leveling wor…
-
Hello, I'm using the Marlin v1.0.2 with auto bed leveling. The command G29 and the auto bed leveling process have no problem, however when I'm printing a rectangular calibration cube, the vertical 'wa…
-
Hi folks,
I'm very new to GitHub and this is my first opened issue, so please be kind ;-)
Using a Kossel Mini for about 1.5 years I tried switching to the latest Marlin Development version (last com…
-
Running the auto-bed leveling only moves the Z-stepper when delta geometry is enabled, rather than moving all 3 steppers to move the probe down
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Probe temperature compensation has effect in exactly one place: in G29 for `AUTO_BED_LE…