-
Heya,
just checked this out on Windows 10 with rust 1.47.0-nightly and tried to run the uno-blink example but got:
```
$ cargo build --example uno-blink
Compiling arduino-uno v0.1.0 (C:\Use…
-
Thu 19 Mar 2009 01:45:38 PM CET
boot_lock_fuse_bits_get() Assumes that BLBSET is defined.
In the Tinyx8 RLFB is used, not BLBSET:
SPMCSR – Store Program Memory Control and Status Register
"Bit 3 – …
-
Little thread to start laying down the tracks for a HAL and BSP such that the base core code is abstracted out from the underlaying HW/chip.
Current suggestion is to split in two:
HAL - Hardware abst…
-
Hello team,
I have follow all steps on this page : https://github.com/espressif/idf-eclipse-plugin
Created new project based on hello_world example
When I try to build I have the errors below : …
-
Hey guys, sorry using this channel to ask something like this, but did someone try to port Marlin to Arduino Due (ARM processor)??
If not, any guess about what should be done and how much effort??
T…
-
Mon 02 May 2011 08:25:50 PM UTC
The AT89S52/AT89S51 are Intel MSP-51 (8051) compatible microcontrollers manufactured by Atmel that can be programmed in-system using an SPI interface very similar to t…
-
Since klipper contains multiple src subfolders that cater to a specific architecture as opposed to a specific mcu I suggest renaming them in a uniform way.
- avr devices are covered by the folder `…
-
I tried to activate the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
and compile the script and I got the following error:
```
sketch\ultralcd.cpp: In function 'void lcd_sdcard_pause()':
ul…
-
Hey, I had an problem with my bin file witch is 73880 bytes large.
I definde #define LARGE_MEMORY but that was not the fix
` address = recchar()
-
Hey guys, I have a problem with the firmware that you may be able to help me solve. On the Azteeg X3 Pro board, I have 1/16 stepping set with the settings found on my Git. https://github.com/kcheeeung…