-
I get battery info when on AC.
I don't know if this is meant to output device or laptop battery info, but if it's the former, some info on the device would probably be good. If it's the latter, I'd c…
-
Info on the sensor is found here: https://www.lacrossetechnology.com/products/ltv-w1
LTV-W1 a pretty simple sensor. Just wind speed (and probably a low battery indicator, but I don't have any dead …
-
As conifgured in .gitignore, some files are not commited in to github:
https://github.com/syncfusion/ej2-vue-samples/blob/db9d49d1c7e02f502892be19238dac009d160790/.gitignore#L3-L4
https://github.c…
-
Using a combination horizontal stack and vertical stack, when viewing from a smaller device, i.e. mobile, the icons do not wrap to the next line, but instead bleed over into other cards, causing them …
-
Reported by: @j54n1n
Source: https://forum.mycontroller.org/topic/492/mycontroller-2-0-is-ready-for-testing/9
Hello @jkandasa,
In the meantime I did some test runs with the weather station an…
-
I am able to get a --log-format=COMBINED log parse to run but it's output is always the top 5 IPs that are internal IPs (undesired). I've tried the standard log formats but haven't found one that work…
-
The following errors were reported by 5.0.0-dev.20230226
[Pipeline that generated this bug](https://typescript.visualstudio.com/TypeScript/_build?definitionId=48)
[Logs for the pipeline run](https://t…
-
Visiting Nick today
first cranking attempt:
insert key, start cranking right away while external WBO controller gauge shows 14 which maybe probably means "heating"
result: car was very unhappy an…
-
### Expected Behavior
L1 amps + L2 amps should be x120 to get the KW output
### Actual Behavior
L1 amps + L2 amps are x240 to give double the KW output
### Steps to Reproduce (includin…
-
Do you have any specific lovelace card that would properly show the sensor's attributes (charging/discharging status, charged % etc) ?