-
Hello, Im buidling a new coreXY machine with an SKR Pro 1.2 and the EXP-MOT expansion module, dont have a klipper issue need guidance instead. I want to use TMC5160 and the config only shows UART not …
-
Hey,
I am new to klipper. Trying for several days now to get it running.
My printer is a piper2, corexy, with 4 z-motors.
The 6 motion motors are connected. No extrusion motor yet.
The four z-m…
-
Hello, I have an issue with klipper where I get a lot worse salmon skinning vs when using the same gcode in marlin. I am using a sapphire pro with TMC2208s in standalone mode for the 2 corexy axis and…
-
Google translation, sorry ...
Hello!
Successfully use your product in my printer. For this reason I would like to use klipper for the laser ...
In fact, I have no z axis, only x and y. Kinematics -…
-
I am using Marlin version: ROBO3DR1V3_06112015 on the ROBO3D+. I created my own gcode using G2/G3 commands, and while the execution of the arcs appears correct, at the end of every arc the print head…
-
> The symptom is under-extrusion on some layers
> not quite randomly - but the pattern is not clear
> Using a 3DBenchy, we get underextrusion halfway up the hull and around the cabin pillars especiall…
-
So I was tweaking with Pid settings on my hotend and when done, (please note I didn't change anything for the X and Y axis) I saved and when using my printer it seemed the x and y shifted. When I try …
-
Hello there!
After reading about Klipper on Hackaday, I decided that I want to install it on my Raspberry Pi 2/Octoprint/CR-10 combo. I really like the idea of utilizing the spare computational pow…
chrzr updated
2 years ago
-
Hi, guys, my name is Vlad Strateniuk, i'm from Ukraine and here is REXY, my project direct driven extruder on CoreXY Kinematic
The XYE motors is taken out of the print space which is why the extru…
-
Core XY printer, Marlin development downloaded 24/03/15. Arduino 1.05
```
#define X_PROBE_OFFSET_FROM_EXTRUDER -10
#define Y_PROBE_OFFSET_FROM_EXTRUDER 60
#define Z_PROBE_OFFSET_FROM_EXTRUDER 4.0
#d…