-
I try to build the project for maix_v83x.
After cloning and submodule init, following the instructions in readme, I get the following error
```
/opt/v83x_linux_x86_python3.8_toolchain/toolchai…
-
### 描述您遇到的bug
最近编译了openwrt-23.05,使用了nftable和smartdns分支的passwall以及mwan3,发现passwall启动后卡在“开始加载防火墙规则...”时间在2分钟以上,甚至10分钟都没有反应,这时如果重启passwall,则提示脚本正在运行,不重复,退出,包括停止也不行,只有解除进程守护强行停止,然后再启动passwall,即使这样也还是卡在加载…
-
Hello,
I own a OrangePi One SBC board with the H3 SoC having the Mali-400 MP2 GPU with the latest linux-sunxi 5.10.x kernel having the opengl lima driver module functional with armbian distribution…
-
I can't bulid versiion 2.5.2 volk on a 32 bit armv7l cpu.
[build.log](https://github.com/gnuradio/volk/files/9543607/build.log)
[compile.log](https://github.com/gnuradio/volk/files/9543605/compile…
-
-
My program run OK on my PC(x86_64)
But when I cross compile it to arm(arm_cortex-a7_neon-vfpv4), it OK, but when I run it, it raise error
nim c -d:release --opt:size --cpu:arm --cc:clang --clang.exe…
-
### What happened?
Came home to find that my zigbee devices didn't work anymore - with regards to any automations I made.
The zigbee2mqtt frontend was still accessible, but the devices just didn't…
-
I am trying to compile the library for an embedded system based on an ARM Cortex A7.
I have not been able to compile the project yet due to several errors that I have to fix to complete the port.
…
-
### What happened?
Builds complete without reporting failures..... Do not move beyond Starting kernel ...
STATUS: Investigating possible causes!
`=> booti ${kernel_addr_r} - ${fdtcontroladdr}…
-
### Maintainer:
@thess
### Environment:
* Building for Xunlog OrangePi Plus (sun8i):
`grep ^CONFIG_TARGET .config`:
```
CONFIG_TARGET_sunxi=y
CONFIG_TARGET_sunxi_cortexa7=y
C…