-
I think it's time for an anchor issue to gather data for the Z-turn port since it is a very popular board.
-
We need code to actually measure stuff, by getting data from the USRP N210 receiver. Some test-code was written but not put on github recently by @hlinander and @symmsaur , I paste it here so we don't…
-
The AP22811 have been marked as NOT RECOMMENDED FOR NEW DESIGN by Diodes lately, shall we consider use its successor, AP22818, as USB power switch at U1, U12, U13?
_Edit: both of them are ***NOT*** s…
-
Please provide your feedback to the Z-Stack_3.x.0 coordinator 20230507 firmware here.
I hope this solves the `NWK_TABLE_FULL` many people were experiencing.
**Changelog**
> # 20230507
> - En…
-
Hello,
I'm trying to use cloudcutter to detach the mentioned Lenovo Smart Bulb, but it never connects to the provided SSID. Logs and some comments:
```
$ sudo ./tuya-cloudcutter.sh -v -r -s 'ASUS…
-
Input units that are %, per kW, or per kWh may apply to AC or DC capacity ratings or to AC or DC generated or charge/discharge power values. Variable units labels do not always make that clear.
Go …
-
I built a power flow case based on a promod file data, but while running DCOPF onto it, I encountered error as below.
What made me confused was I have already relaxed branches' constraints and the ma…
-
Running with no modules other than pf2e thaum-vuln. Still works when rolling back to 0.9.8
Error in console:
helpers.js:186 Uncaught (in promise) TypeError: a.items is not iterable
at getActo…
-
I am currently trying to add a solarcharger,
to feed in data from an additional power-source (a balkony system
where i measure the power with tasmota in mqtt).
My goal is to change the mqtt-Data fr…
-
I am using a field weakening of 7-9 amps. The maximum speed has become noticeably higher, but there is a nuisance in controlling the hovercar. After accelerating to the maximum speed (30 km / h), if y…