-
### Board
ESP32-S3
### Device Description
I have a custom ESP32-S3 board based on the ESP32-S3-DevKitC-1 development board that I am programming using PlatformIO with the Arduino framework.
The …
-
the **factory sketch** build is OK, but the **filsystem build** reports error.
Data directory is there and not empty
any ideas?
Here is my output:
Processing T-QT-Pro-N8 (platform: espressif32; …
-
So I've been banging my head against a wall and don't understand the problem here.
If been trying the Write and the UART example but on both the onWrite even is not fired after writing something to t…
-
I'm using esp32-s3 on micropython 1.19.1.
On mpremote [document](https://docs.micropython.org/en/latest/reference/mpremote.html).
If you use cp -r, it assumes you can copy whole directory to esp32…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Saw your recent comment on FuryGPU at hackernews; figured I'd pop in and let you know that the ESP32-P4 is on the way soon (should start hearing a bunch of buzz about it come june or july) with a PPA …
-
我直接将工程ESP32-S3-EYE中AppLCD接口中的logo_en_240x240_lcd数组中的数据替换,显示的颜色异常,形状是对的。
我是将图片通过RGB888转成RGB565格式的16位无符号整形数组,显示的图片如下。
![U4%FO)MY6B3D~`I6~ RX73J](https://github.com/espressif/esp-who/assets/138110995…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
The block runs properly; once the board gets an IP address, `esp_netif_handlers` line prints, followed by the line from the block. After that, I get either of the following errors.
On original ESP3…