-
APMPlanner2 is of limited use for boat control, it can't show wind or rudder/sail states graphically and doesn't have nautical charts. Write a plugin for sending NMEA to OpenCPN over a serial/xbee lin…
-
Hello,
I used this library in a GPS synchronized clock project. The assumption was to display the time with a resolution of 0.1 seconds and an error of no more than 50 milliseconds. The clock has its…
-
IMU topics are `/imu/data` and optionally `/imu/mag`, in the `imu_link` frame.
GPS topics are `/navsat/fix` and optionally `/navsat/sentence`, `/navsat/vel`, with the antenna attached to `navsat_link…
-
Hi,
i have 3 cities around me on the same frequency who use bht for public lighting.
Have you a tip for discover coding frames?
F0GPI updated
5 years ago
-
Hello Paul,
I would like to program an additional function (solar tracker), how would you go about it. So I guess I need a separate module, but at which point should I put it in? Besides of course …
-
```
What steps will reproduce the problem?
1. Connect USB device to the Dell Mini 10v.
--I have tested a Qstarz BT-1000X external GPS receiver and a Cambridge Silicon
Radio Bluetooth adapter.
--Also …
-
With the C94-M8P evaluation board it is currenctly not possible to generate RXM messages, even if the receiver is correctly configurated. This is due to a twist in u-blox product description. In the u…
-
```
What steps will reproduce the problem?
1. Connect USB device to the Dell Mini 10v.
--I have tested a Qstarz BT-1000X external GPS receiver and a Cambridge Silicon
Radio Bluetooth adapter.
--Also …
-
Got the following error:
```
(venv) rgottula@nix:~/dev/track$ align
Traceback (most recent call last):
File "/home/rgottula/dev/venv/bin/align", line 11, in
load_entry_point('track', 'co…
-
Hello, I am trying to use GNSS-SDR on real-time signals, I built GNSS-SDR from source and cloned from "next" branch, and I am using MacBook Pro 14(2021), the chip is Apple M1 Pro, macOS Sonoma Version…