-
Hi!
I am using gr-iridium with hackrf (iridium-extractor -D 4 examples/hackrf.conf | grep "A:OK" > output.bits) and it works right.
Does anyone know how I can detect overflow during the online …
-
I get the following when trying to use the AppImage:
linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.000-0-unknown
Gtk-Message: 08:27:53.987: Failed to load module "xapp-gtk3-module"
…
-
Rattling sound and audio buffer underflows when the input rate is under ~4Msps.
It is visible in console as "aUaU" when LINUX_AUDIO_BACKEND=Gr-audio.
At high input rates ( >8Msps ) this bug never oc…
-
When the sample rate (or filter bandwidth) is changed in running state, the DSP freezes with the following error log:
```
SaveConfig
New LNB LO: 0 Hz
saveSettings *** FIXME_ SQL on/off
New FFT ra…
-
Hi, loving 2.14.5 on macOS 11.6 with CloudIQ, many thanks.
I can click on a frequency digit and increase or decrease with the up-down arrow keys. Would be great if I could move to an adjacent digit…
ghost updated
2 years ago
-
Hi, I am installing gqrx on linuxmint latest (based on Ubuntu 20.04 latest), I have added gnuradio's PPA and installed gnuradio 3.9. When I continue to install gqrx, it will always try to installl gnu…
-
### Steps to reproduce
1 Connect HackRF to PC
2. Start gqrx (with the hackrf selected/set to default)
3. Click Start DSP processing.
4. (optional) Transmit to a local HAM repeater RX frequency (1…
-
Hi there,
first of all, thanks for great job here.
I have a question, I need EMOS E6016 sensor support but I have trouble getting it decoded using this lib with OpenMQTTGateway.
I ran update_…
-
Hi! I'm trying to run the AFSK example in my SX1278 module it works but I can't decode the signal. It seems the module is active all the time. I can't understand what's going on.
![Captura de tela de…
-
When I start my HackRF on (e.g.) 95 Mhz (receive) within GQRX the RX led is on. By quitting or pressing stop within GQRX, the RX led turns off. Normal behaviour.
Within gnuradio-companion (v 3.7.1…
Epios updated
2 years ago