-
KiCad library usually have both the standard and the hand-soldering version of some footprints. I have been following the datasheet for the stardard footprint. But I do not know how much I need extrap…
-
## Issue description
KISYSMOD and KISYS3DMOD point to missing directories. On my system they are `/nix/store/dlx19m6rpfh79nqng9n7yxflr1vkqyn0-kicad-5.0.0/share/kicad/modules` and `/nix/store/dlx19m…
-
I have seen a few footprints which has multiple lines in the same spots, probably because the were copied and paste and forgot about
-
Dear all,
I think the footprint OptoDevice/ST_VL53L1X is rotated incorrectly by 180 degrees. The part was added in #1623.
Looking at the [datasheet](https://www.st.com/resource/en/datasheet/vl53l1…
-
Hello,
I think the footprint of 'Potentiometer_Omeg_PC16BU_Vertical' has a problem with the pad number.
In fact, the number 1 and 3 are interverted.
The Silkscreen is on the front layer, so the p…
-
The footprint Connector_Audio/Jack_3.5mm_Neutrik_NMJ6HCD2_Horizontal is misnamed. This is a 1/4" (6.35mm) jack, not a 3.5mm jack.
For reference: https://www.neutrik.com/en/product/nmj6hcd2
I ima…
-
Pulled from https://github.com/pointhi/kicad-footprint-generator/pull/224#issuecomment-442506843, which was spawned from https://github.com/KiCad/kicad-footprints/pull/1107.
@SchrodingersGat @poesc…
-
When making https://github.com/KiCad/kicad-footprints/pull/738, I find that none of the existing dual LED symbols have a matching pinout for K[ingbright AAA3528ESGCT](http://www.kingbrightusa.com/imag…
-
FreeCAD verison info:
```
OS: Arch Linux (i3/i3)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.16442 (Git)
Build type: Release
Branch: master
Hash: 2935cbb71aa68f257c1d3f7…
-
for VR crank we really need a way to hook up logic analyzer for troubleshooting. While we have tiny LED pads to solder to I would prefer a nice 2mm diameter test pad so that if needed a pin could be b…