-
I've noticed failures due to the timings on GS1903 pixels which are often now sold as WS2811 (particularly in strings and 12V strips). I've filed https://github.com/Makuna/NeoPixelBus/issues/387 to se…
-
Good Day All,
I need help in wiring my ws2812B to the pico fighting board v1.1. I would like to ask if you have any pictures on how you wired them on your v1.1 pico.
I also would like to ask if …
-
Currently Aurora controls by LED strips attached to my Corsair Lighting Node by using the color settings applied to my Logitech G502 Mouse. However, since my LEDs are individually addressable, I wante…
-
**Is your feature request related to a problem? Please describe.**
My problem is, that on my current controller, one pin needs to inverted to show the correct color on the whole strip. If its at the …
-
Anyone observe this? Watch loses time and restarts. Loose battery perhaps?
EDIT: I can consistently reproduce this by pressing on the battery casing. The red LED will blink once, and the watch will…
-
I am trying to open a lighting strip (on a Razor Mousepad) vid=0x1532 pid=0x0c00 and it is failing at the CreateFile function (5 - access denied). It is using the MS hid driver as far as I can tell (…
-
I have a 200 Leds WS2812b strip powered by a dedicated 12v PSU (I don't remember the output current, but I know that was enough to power the strip) that I use for ambient lighting my room.
I built th…
-
Hey,
I can't change the color via HomeKit on LED1,LED2 and LED3; LEDMiniController works fine. With the MagicHomeApp everything works great. i used BEILAI DC 12 V Mini WIFI LED RGB Controller as LEDM…
-
Running on a PocketBeagle and using SPI0 (which correlates to spidev1.0 in C++), LEDs won't completely turn off even when sent a value of 0 for every color, i.e. `pixel.RGB(0, 0, 0);`. Other than that…
-
### The problem
I flashed a M5Atom Echo using https://esphome.io/projects/ as Voice assistant. After configuring it appeared in my esphome dashboard. I then tried to change the name and yaml file nam…